This Ohio Steel Lawn Sweeper features an extra-large capacity 22 cu. ft. heavy-duty collector bag and a 42 in. sweeping path allowing you to get your lawn care finished quickly. Patented spiral brush sweeps more efficiently than standard sweepers and puts less stress on gears for long service life. No-slip positive lock height adjustment has numbered height settings that can be changed while viewing brush for proper adjustment. Hopper bag empties by pulling rope from the seat of your tractor – just reverse to debris or compost area and pull the rope to empty the hopper. Extra wide 9 in. chute is less likely to clog, especially when sweeping damp grass clippings that can clump together. Reversible hitch allows for efficient level operation with any tractor hitch height – without the use of easy to lose spacer rings!
What materials will your lawn sweeper pick up?
A. We have tested the sweeper to pick up leaves, small branches, small nuts (acorns), and pine needles.
I only need a piece of the frame kit how do I buy this?
A. The frame pieces for all Sweepers are available separately on our parts store.
Can I empty the hopper bag while seated on the tractor?
A. Yes, we include a nylon rope that you can pull from the tractor seat to dump debris.
How do I store my sweeper in the winter months?
A. Make sure the sweeper is clean to prevent rust on steel parts and mildew on cloth parts. Remove hopper bag by pulling the two clevis pins from the bag tubes and slide out. The hopper bag can collapse for storage by removing the rear hopper support rods and folding the frame down. Do not store unit on brushes as permanent damage may occur.
What is the recommended height and brush setting?
A. Brushes set too low for conditions will cause unnecessary wear. For best performance, operate sweeper with brushes ½” down into the grass. When sweeping heavy or wet materials start with a higher setting, lowering with each pass.
What material are the wheels made of?
A. The wheels are constructed of fiberglass reinforced nylon, which is a high impact, high density polymer.
This product is available with the following retailers. Click a logo to view the product.
|BRACKET, BRUSH (ZINC)||307122-ZC||$2.40|
|BRUSH, 42" SPIRAL||307321||$14.90|
|BUSHING, WHEEL, SWEEPER||6000540||$0.80|
|CARRIAGE BOLT, 1/4-20 X 1" (ZINC)||6000733-ZC||$0.20|
|CLAMP, BRUSH (ZINC)||307121-ZC||$1.20|
|COTTER HAIRPIN, 3/32" (BLACK)||307083-ZB||$0.30|
|COTTER PIN, 1/8" X 1-1/2" (ZINC)||300081-ZC||$0.10|
|DUST COVER, SWEEPER||6000539||$4.00|
|FRAME KIT, HOPPER, 22CF (BLACK)||6004133-B2||$56.30|
|HANDLE, ADJUSTMENT, V2 (BLACK)||6003957-B2||$5.40|
|HARDWARE BAG, V2||6004344||$20.50|
|HEX BOLT, 1/4-20 X 1-1/4" (ZINC)||3000539-ZC||$0.20|
|HEX NUT, 1/4-20 NYLOC (ZINC)||300065-ZC||$0.10|
|HEX NUT, 3/8-16 NYLOC (BLACK)||3000618-ZB||$0.40|
|HITCH, SWEEPER, V2 (BLACK)||6003965-B2||$37.00|
|HOPPER BAG, 22CF||307331||$72.50|
|KIT, SWEEPER PINION/BEARING||6000828||$46.00|
|MANUAL, 4222V2 (REV B)||6004082||$3.00|
|PIN, PLUNGER (ZINC)||6004020-ZC||$1.80|
|PIVOT ROD, HOPPER, 42" (BLACK)||307051-B2||$6.00|
|SNAP BUTTON, 1/4" (ZINC)||6000208-ZC||$0.20|
|SNAP BUTTON, 3/8" (ZINC)||6000222-ZC||$0.50|
|STOP BAR, HOPPER, 42" (BLACK)||307061-B2||$10.40|
|SWEEPER ASSY, 42V2 (GREY)||6004353-G2|
|TUBE, BRUSH, 42" SPIRAL (BLACK)||307124-B2||$15.70|
|TUBE, CONNECT, HOPPER (BLACK)||307032-B2||$3.90|
|TUBE, HITCH, 42V2 (BLACK)||6003953-B2||$55.90|
|TUBE, MOUNT, HITCH (BLACK)||307034-B2||$3.90|
|WASHER, 1/4" SAE (ZINC)||3000716-ZC||$0.10|
|WASHER, 3/4" SAE (ZINC)||3000721-ZC||$0.50|
2575 Ferris Road
Columbus OH 43224
Phone (614) 471-4800
Fax (614) 471-1190
© 2021 Ohio Steel Industries, Inc.